Doepfer A-161 Clock Sequencer Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Audio Doepfer A-161 Clock Sequencer. Doepfer A-161 Clock Sequencer User Manual Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 10
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 0
doepfer
System A - 100
Clock Sequencer A-161
1
1. Introduction
Module A-161 is an eight-step Clock Sequencer
which is internally connected to the Clock Divider
(A-160)
.
Eight outputs
are sequentially switched by
the clock signals from the A-160 (see Fig. 1) and can
act, for instance, as sequential rhythmic triggers for an
envelope. The reset on the A-160 also works on the
A-161 (instant return to Step 1).
A
Installation in the rack system:
The A-161 must be positioned
directly to the
right of the A-160.
Join the two modules with the supplied 10-way ribbon
cable. Use the
upper
10-way socket on each module.
Make sure that the ribbon cable isn’t twisted, and that
the colour-coded section is oriented the same on both
modules.
Only join the
A-160
to the
system bus
! Leave the
lower 10-way socket on the A-161 unused.
A-161
1
2
3
4
5
6
7
8
Clock
Sequencer
Przeglądanie stron 0
1 2 3 4 5 6 7 8 9 10

Podsumowanie treści

Strona 1 - 1. Introduction

doepferSystem A - 100Clock Sequencer A-16111. IntroductionModule A-161 is an eight-step Clock Sequencerwhich is internally connected to the Clock

Strona 2 - 2. Overview

A-161 Clock SequencerSystem A - 100doepfer10

Strona 3 - 4. Outputs

A-161 Clock SequencerSystem A - 100doepfer22. OverviewIndicators:1 LED ... 8 LED : Status indicators for each outputOutputs:! 1 ... ( 8 : Outp

Strona 4 - 5. User examples

doepferSystem A - 100Clock Sequencer A-16133. Indicators1 LED ... 8 LEDLEDs 1 to 8 are the status indicators for outputs ! to(.4. Outputs! 1 .

Strona 5

A-161 Clock SequencerSystem A - 100doepfer45. User examples"Rhythmatising" notesIn the example in Fig. 2 (see next page) notes playedon t

Strona 6 - Creating complex envelopes

doepferSystem A - 100Clock Sequencer A-1615Abb. 2: "Rhythmatising” notesP Instead of an LFO, you can also use MIDI-clock signals from a MIDI/CV

Strona 7 - Clock Sequencer A-161

A-161 Clock SequencerSystem A - 100doepfer6Creating complex envelopesA small modification to the previous patch is shown inFig. 3. Here, the Clock

Strona 8 - Mini analog sequencer

doepferSystem A - 100Clock Sequencer A-1617Different envelopes with each note playedWith the patch in Fig. 4, every time a new note isplayed, a diff

Strona 9

A-161 Clock SequencerSystem A - 100doepfer8Mini analog sequencerThe patch in Fig. 5 produces a four-step mini analogsequencer.A clock signal either

Strona 10

doepferSystem A - 100Clock Sequencer A-16196. Patch-SheetThe following diagrams of the module can help yourecall your own Patches. They’re designed

Komentarze do niniejszej Instrukcji

Brak uwag